Preparation of the Workshop instance

15 minutes  

The instructor will provide you with the login information for the instance that we will be using during the workshop.

When you first log into your instance, you will be greeted by the Splunk Logo as shown below. If you have any issues connecting to your workshop instance then please reach out to your Instructor.

$ ssh -p 2222 splunk@<ip-address>

███████╗██████╗ ██╗     ██╗   ██╗███╗   ██╗██╗  ██╗    ██╗  
██╔════╝██╔══██╗██║     ██║   ██║████╗  ██║██║ ██╔╝    ╚██╗ 
███████╗██████╔╝██║     ██║   ██║██╔██╗ ██║█████╔╝      ╚██╗
╚════██║██╔═══╝ ██║     ██║   ██║██║╚██╗██║██╔═██╗      ██╔╝
███████║██║     ███████╗╚██████╔╝██║ ╚████║██║  ██╗    ██╔╝ 
╚══════╝╚═╝     ╚══════╝ ╚═════╝ ╚═╝  ╚═══╝╚═╝  ╚═╝    ╚═╝  
Last login: Mon Feb  5 11:04:54 2024 from [Redacted]
Waiting for cloud-init status...
Your instance is ready!
splunk@show-no-config-i-0d1b29d967cb2e6ff:~$

To ensure your instance is configured correctly, we need to confirm that the required environment variables for this workshop are set correctly. In your terminal run the following script and check that the environment variables are present and set with actual valid values:

​
. ~/workshop/petclinic/scripts/check_env.sh
ACCESS_TOKEN = <redacted>
REALM = <e.g. eu0, us1, us2, jp0, au0 etc.>
RUM_TOKEN = <redacted>
HEC_TOKEN = <redacted>
HEC_URL = https://<...>/services/collector/event
INSTANCE = <instance_name>

Please make a note of the INSTANCE environment variable value as this will used later to filter data in Splunk Observability Cloud.

For this workshop, all of the above are required. If any have values missing, please contact your Instructor.

Delete any existing OpenTelemetry Collectors

If you have previously completed a Splunk Observability workshop using this EC2 instance, you need to ensure that any existing installation of the Splunk OpenTelemetry Collector is deleted. This can be achieved by running the following command:

helm delete splunk-otel-collector
Last Modified Sep 27, 2024

Subsections of 2. Preparation

Deploy the Splunk OpenTelemetry Collector

To get Observability signals (metrics, traces and logs) into Splunk Observability Cloud the Splunk OpenTelemetry Collector needs to be deployed into the Kubernetes cluster.

For this workshop, we will be using the Splunk OpenTelemetry Collector Helm Chart. First we need to add the Helm chart repository to Helm and update to ensure the latest version:

​
helm repo add splunk-otel-collector-chart https://signalfx.github.io/splunk-otel-collector-chart && helm repo update
Using ACCESS_TOKEN={REDACTED}
Using REALM=eu0
"splunk-otel-collector-chart" has been added to your repositories
Using ACCESS_TOKEN={REDACTED}
Using REALM=eu0
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "splunk-otel-collector-chart" chart repository
Update Complete. ⎈Happy Helming!⎈

Splunk Observability Cloud offers wizards in the UI to walk you through the setup of the OpenTelemetry Collector on Kubernetes, but in the interest of time, we will use the Helm install command below. Additional parameters are set to enable the operator and automatic discovery and configuration.

  • --set="operator.enabled=true" - this will install the Opentelemetry operator that will be used to handle automatic discovery and configuration.
  • --set="certmanager.enabled=true" - this will install the required certificate manager for the operator.
  • --set="splunkObservability.profilingEnabled=true" - this enables Code Profiling via the operator.

To install the collector run the following command, do NOT edit this:

​
helm install splunk-otel-collector --version 0.111.0 \
--set="operator.enabled=true", \
--set="certmanager.enabled=true", \
--set="splunkObservability.realm=$REALM" \
--set="splunkObservability.accessToken=$ACCESS_TOKEN" \
--set="clusterName=$INSTANCE-k3s-cluster" \
--set="splunkObservability.profilingEnabled=true" \
--set="agent.service.enabled=true"  \
--set="environment=$INSTANCE-workshop" \
--set="splunkPlatform.endpoint=$HEC_URL" \
--set="splunkPlatform.token=$HEC_TOKEN" \
--set="splunkPlatform.index=splunk4rookies-workshop" \
splunk-otel-collector-chart/splunk-otel-collector \
-f ~/workshop/k3s/otel-collector.yaml
LAST DEPLOYED: Fri Apr 19 09:39:54 2024
NAMESPACE: default
STATUS: deployed
REVISION: 1
NOTES:
Splunk OpenTelemetry Collector is installed and configured to send data to Splunk Platform endpoint "https://http-inputs-o11y-workshop-eu0.splunkcloud.com:443/services/collector/event".

Splunk OpenTelemetry Collector is installed and configured to send data to Splunk Observability realm eu0.

[INFO] You've enabled the operator's auto-instrumentation feature (operator.enabled=true)! The operator can automatically instrument Kubernetes hosted applications.
  - Status: Instrumentation language maturity varies. See `operator.instrumentation.spec` and documentation for utilized instrumentation details.
  - Splunk Support: We offer full support for Splunk distributions and best-effort support for native OpenTelemetry distributions of auto-instrumentation libraries.

Ensure the Pods are reported as Running before continuing (this typically takes around 30 seconds).

​
kubectl get pods | grep splunk-otel 
splunk-otel-collector-certmanager-cainjector-5c5dc4ff8f-95z49   1/1     Running   0          10m
splunk-otel-collector-certmanager-6d95596898-vjxss              1/1     Running   0          10m
splunk-otel-collector-certmanager-webhook-69f4ff754c-nghxz      1/1     Running   0          10m
splunk-otel-collector-k8s-cluster-receiver-6bd5567d95-5f8cj     1/1     Running   0          10m
splunk-otel-collector-agent-tspd2                               1/1     Running   0          10m
splunk-otel-collector-operator-69d476cb7-j7zwd                  2/2     Running   0          10m

Ensure there are no errors reported by the Splunk OpenTelemetry Collector (press ctrl + c to exit) or use the installed awesome k9s terminal UI for bonus points!

​
kubectl logs -l app=splunk-otel-collector -f --container otel-collector
2021-03-21T16:11:10.900Z        INFO    service/service.go:364  Starting receivers...
2021-03-21T16:11:10.900Z        INFO    builder/receivers_builder.go:70 Receiver is starting... {"component_kind": "receiver", "component_type": "prometheus", "component_name": "prometheus"}
2021-03-21T16:11:11.009Z        INFO    builder/receivers_builder.go:75 Receiver started.       {"component_kind": "receiver", "component_type": "prometheus", "component_name": "prometheus"}
2021-03-21T16:11:11.009Z        INFO    builder/receivers_builder.go:70 Receiver is starting... {"component_kind": "receiver", "component_type": "k8s_cluster", "component_name": "k8s_cluster"}
2021-03-21T16:11:11.009Z        INFO    k8sclusterreceiver@v0.21.0/watcher.go:195       Configured Kubernetes MetadataExporter  {"component_kind": "receiver", "component_type": "k8s_cluster", "component_name": "k8s_cluster", "exporter_name": "signalfx"}
2021-03-21T16:11:11.009Z        INFO    builder/receivers_builder.go:75 Receiver started.       {"component_kind": "receiver", "component_type": "k8s_cluster", "component_name": "k8s_cluster"}
2021-03-21T16:11:11.009Z        INFO    healthcheck/handler.go:128      Health Check state change       {"component_kind": "extension", "component_type": "health_check", "component_name": "health_check", "status": "ready"}
2021-03-21T16:11:11.009Z        INFO    service/service.go:267  Everything is ready. Begin running and processing data.
2021-03-21T16:11:11.009Z        INFO    k8sclusterreceiver@v0.21.0/receiver.go:59       Starting shared informers and wait for initial cache sync.      {"component_kind": "receiver", "component_type": "k8s_cluster", "component_name": "k8s_cluster"}
2021-03-21T16:11:11.281Z        INFO    k8sclusterreceiver@v0.21.0/receiver.go:75       Completed syncing shared informer caches.       {"component_kind": "receiver", "component_type": "k8s_cluster", "component_name": "k8s_cluster"}
Deleting a failed installation

If you make an error installing the OpenTelemetry Collector you can start over by deleting the installation with the following command:

helm delete splunk-otel-collector
Last Modified Nov 13, 2024

Deploy the PetClinic Application

The first deployment of the application will be using prebuilt containers to give the base scenario: a regular Java microservices-based application running in Kubernetes that we want to start observing. So let’s deploy the application:

​
kubectl apply -f ~/workshop/petclinic/petclinic-deploy.yaml
deployment.apps/config-server created
service/config-server created
deployment.apps/discovery-server created
service/discovery-server created
deployment.apps/api-gateway created
service/api-gateway created
service/api-gateway-external created
deployment.apps/customers-service created
service/customers-service created
deployment.apps/vets-service created
service/vets-service created
deployment.apps/visits-service created
service/visits-service created
deployment.apps/admin-server created
service/admin-server created
service/petclinic-db created
deployment.apps/petclinic-db created
configmap/petclinic-db-initdb-config created
deployment.apps/petclinic-loadgen-deployment created
configmap/scriptfile created

At this point, we can verify the deployment by checking that the Pods are running. The containers need to be downloaded and started so this may take a couple of minutes.

​
kubectl get pods
NAME                                                            READY   STATUS    RESTARTS   AGE
splunk-otel-collector-certmanager-dc744986b-z2gzw               1/1     Running   0          114s
splunk-otel-collector-certmanager-cainjector-69546b87d6-d2fz2   1/1     Running   0          114s
splunk-otel-collector-certmanager-webhook-78b59ffc88-r2j8x      1/1     Running   0          114s
splunk-otel-collector-k8s-cluster-receiver-655dcd9b6b-dcvkb     1/1     Running   0          114s
splunk-otel-collector-agent-dg2vj                               1/1     Running   0          114s
splunk-otel-collector-operator-57cbb8d7b4-dk5wf                 2/2     Running   0          114s
petclinic-db-64d998bb66-2vzpn                                   1/1     Running   0          58s
api-gateway-d88bc765-jd5lg                                      1/1     Running   0          58s
visits-service-7f97b6c579-bh9zj                                 1/1     Running   0          58s
admin-server-76d8b956c5-mb2zv                                   1/1     Running   0          58s
customers-service-847db99f79-mzlg2                              1/1     Running   0          58s
vets-service-7bdcd7dd6d-2tcfd                                   1/1     Running   0          58s
petclinic-loadgen-deployment-5d69d7f4dd-xxkn4                   1/1     Running   0          58s
config-server-67f7876d48-qrsr5                                  1/1     Running   0          58s
discovery-server-554b45cfb-bqhgt                                1/1     Running   0          58s

Make sure the output of kubectl get pods matches the output as shown above. Ensure all the services are shown as Running (or use k9s to continuously monitor the status).

To test the application you need to obtain the public IP address of the instance you are running on. You can do this by running the following command:

curl http://ifconfig.me

You can validate if the application is running by visiting http://<IP_ADDRESS>:81 (replace <IP_ADDRESS> with the IP address you obtained above). You should see the PetClinic application running. The application is also running on ports 80 & 443 if you prefer to use those or port 81 is unreachable.

Pet shop Pet shop

Make sure the application is working correctly by visiting the All Owners (1) and Veterinarians (2) tabs, you should get a list of names in each case.

owners owners