Install Docker Desktop¶
Refer to Installation
SC4S Initial Configuration¶
SC4S can be run with
docker-compose or directly from the CLI with the simple
docker run command. Both options are outlined below.
Create a directory on the server for local configurations and disk buffering. This should be available to all administrators, for example:
docker-compose) Create a docker-compose.yml file in the directory created above, based on the template below:
IMPORTANT: Always use the latest compose file (below) with the current release. By default, the latest container is automatically downloaded at each restart. Therefore, make it a habit to check back here regularly to be sure any changes that may have been made to the compose template file below (e.g. suggested mount points) are incorporated in production prior to relaunching via compose.
version: "3.7" services: sc4s: deploy: replicas: 2 restart_policy: condition: on-failure image: ghcr.io/splunk/splunk-connect-for-syslog/container2:2 ports: - target: 514 published: 514 protocol: tcp - target: 514 published: 514 protocol: udp - target: 601 published: 601 protocol: tcp - target: 6514 published: 6514 protocol: tcp env_file: - /opt/sc4s/env_file volumes: - /opt/sc4s/local:/etc/syslog-ng/conf.d/local:z - splunk-sc4s-var:/var/lib/syslog-ng # Uncomment the following line if local disk archiving is desired # - /opt/sc4s/archive:/var/lib/syslog-ng/archive:z # Map location of TLS custom TLS # - /opt/sc4s/tls:/etc/syslog-ng/tls:z volumes: splunk-sc4s-var:
/opt/sc4sfolder as shared in Docker (Settings -> Resources -> File Sharing)
- Execute the following command to create a local volume that will contain the disk buffer files in the event of a communication failure to the upstream destination(s). This will also be used to keep track of the state of syslog-ng between restarts, and in particular the state of the disk buffer. This is a required step.
sudo docker volume create splunk-sc4s-var
NOTE: Be sure to account for disk space requirements for the docker volume created above. This volume is located in
/var/lib/docker/volumes/and could grow significantly if there is an extended outage to the SC4S destinations (typically HEC endpoints). See the “SC4S Disk Buffer Configuration” section on the Configuration page for more info.
IMPORTANT: When creating the directories below, ensure the directories created match the volume mounts specified in the
docker-compose.ymlfile (if used). Failure to do this will cause SC4S to abort at startup.
Create a file named
/opt/sc4s/env_fileand add the following environment variables and values:
SC4S_DEST_SPLUNK_HEC_DEFAULT_URL=https://your.splunk.instance:8088 SC4S_DEST_SPLUNK_HEC_DEFAULT_TOKEN=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx #Uncomment the following line if using untrusted SSL certificates #SC4S_DEST_SPLUNK_HEC_DEFAULT_TLS_VERIFY=no
SC4S_DEST_SPLUNK_HEC_DEFAULT_TOKENto reflect the correct values for your environment. Do not configure HEC Acknowledgement when deploying the HEC token on the Splunk side; the underlying syslog-ng http destination does not support this feature. Moreover, HEC Ack would significantly degrade performance for streaming data such as syslog.
The default number of
SC4S_DEST_SPLUNK_HEC_WORKERSis 10. Consult the community if you feel the number of workers (threads) should deviate from this.
NOTE: Splunk Connect for Syslog defaults to secure configurations. If you are not using trusted SSL certificates, be sure to uncomment the last line in the example above.
You can use the following command to directly start SC4S if you are not using
docker-compose. Be sure to map the listening ports
-p arguments) according to your needs:
/usr/bin/podman run -p 514:514 -p 514:514/udp -p 6514:6514 -p 5000-5020:5000-5020 -p 5000-5020:5000-5020/udp \ --env-file=/opt/sc4s/env_file \ --name SC4S \ --rm splunk/scs:latest
If you are using
docker compose, from the catalog where you created compose file execute:
docker compose up
docker compose with
-f flag pointing to the compose file
docker compose up -f /path/to/compose/file/docker-compose.yml
If the container is run directly from the CLI, simply stop the container using the
docker stop <containerID> command.
docker compose, execute:
docker compose down
docker compose down -f /path/to/compose/file/docker-compose.yml
Verify Proper Operation¶
SC4S has a number of “preflight” checks to ensure that the container starts properly and that the syntax of the underlying syslog-ng configuration is correct. After this step completes, to verify SC4S is properly communicating with Splunk, execute the following search in Splunk:
index=* sourcetype=sc4s:events "starting up"
This should yield an event similar to the following:
syslog-ng starting up; version='3.28.1'
When the startup process proceeds normally (without syntax errors). If you do not see this, follow the steps below before proceeding to deeper-level troubleshooting:
- Check to see that the URL, token, and TLS/SSL settings are correct, and that the appropriate firewall ports are open (8088 or 443).
- Check to see that the proper indexes are created in Splunk, and that the token has access to them.
- Ensure the proper operation of the load balancer if used.
- Lastly, execute the following command to check the sc4s startup process running in the container.
docker logs SC4S
You should see events similar to those below in the output:
syslog-ng checking config sc4s version=v1.36.0 starting goss starting syslog-ng